View Single Post
Old 05-07-2013, 02:33 PM   #18825
10 years plus club
Mango's Avatar
Join Date: Mar 2006
Location: Southern California
Posts: 24,352
My Ride: F-Sport
Originally Posted by college46 View Post
Increasing the weight of the selector rod leads to easier shifting from the user, this often leads to the driver using to much weight leading to damaging synchros.

I do know UUC and RE both make weighted selector rods, along with there being a variety of options for weighted shift knobs. I still believe that most on this forum will damage their synchros because they are careless shifting.

I also don't see why you wouldn't replace the shift input bushing first. That is the number one contributor to poor shifter feel.
The number one feeling to poor shifter feel in our cars, at least for the S5D320z ZF unit, are the infamous shifter detent pins. I would say if you have this unit, don't bother with shifter upgrades unless this job is completed
Complete Cooling System Guide | Pro Maintenance | Suspension Refresh | New Owner?

Enjoy a lifetime free of problems
Support our DMAX:
Mango is online now   Reply With Quote