Clearing adaptions seems to be the key, not reprogramming. DIS and Progman clear adaptions by default after a DME reflash; WinKFP does not. The CAN-Bus error exists because the DME is "adapted" into expecting an auto transmission.
Originally Posted by TitaniumCranium
Nervous - as I suggested in your thread there may be a related issue for you and Rich-330i as you're both running Euro software. There may be some behavior limited or specific to that DME code.
From my experience and the error information that I pulled using INPA with regards to whether you have to reprogram the DME at all? (A question raised in your thread) I would say that yes, it's necessary to reprogram the DME. If you don't, the CAN bus will show an error indicating that that DME was attempting to contact the EGS module.
Last edited by TerraPhantm; 05-14-2013 at 02:25 AM.