View Single Post
Old 05-08-2004, 04:03 AM   #17
darth
Registered User
 
Join Date: Oct 2003
Location: california
Posts: 29
My Ride: 323i
Quote:
Originally Posted by niL
wow 4 to 4:05! I assume you worked from under the car to get it out then since it's so low. Kudos to you

actually, i just did it from the top. you have to remove the air intake duct that goes over the center of the radiator and take out the fan which takes like 2 minutes. (My car is manual so I didn't have to worry about a fan clutch. Also i did it earlier the day prior cuz I thought I was getting by parts the day before.) The rest should be as easy as pie. By the way if you go to Rogue Engineering and look up thier pulley install directions it will tell you exactly what you need.

http://www.rogueengineering.com/pdf/...er_pulleys.pdf


All in all I'ld say it should take you about 1 hrs from the time you pop your hood to the time you can roll if your being really carefull and taking your time. (It took me a little over an hour and that is including the 15 min I spent online looking for the drive belt tensioner adjustment bolt.)
darth is offline   Reply With Quote