View Single Post
Old 05-12-2004, 02:48 AM   #17
hotcello
Registered User
 
Join Date: May 2003
Location: New York
Posts: 44
My Ride: 2002 M3
Quote:
Originally Posted by peterlai
After the LED Taillight retrofit, I want to get the outside ring to light up with the Brake Light, so I dig into the wiring diagram as well as the intruction of the ABLAS.

I figured out that if you just want the ring to light up with the brake light, you just need to connect the black/green wire to position #4 of the plug like the pic shown below:


Hope this can help a little if you guys are having a hard time getting ABLAS. But for me, I just want the ring to light up no matter what, which is a cheaper way to do...

Peter

you really don't have to get the conector at all, just stick a regular wire from pin number 4(the empty slot)on the light side and stick the other side to the blue wire on the other side and that is it! NO connectors need it! just 1 wire, even the error indicator on the dash will disapear!!
hotcello is offline   Reply With Quote