View Single Post
Old 03-20-2014, 08:35 AM   #361
Teddy7
Registered User
 
Join Date: Mar 2009
Location: Orlando, Florida
Posts: 968
My Ride: slides
Quote:
Originally Posted by Flop View Post
Have any pics of them installed? Hard to tell from the pics in the eBay ad. Do they adjust the roll center like the SLR adapters do? i.e. do they lower the mounting point of the LCA to the knuckle? Thanks!
No to both questions. These do not change geometry of the front end in any way other than putting the tie rod pick-up closer to the center of the hub. The new tie rod pick-up location is at the same height that it was at it's old location. That's partially why these adapters sell for so cheap when compared to the SLR half kit.

Here is what they look like installed on the hub but without the tie rod mounted in the new hole. You can see the new tie rod pick-up hole about midway between the two nuts.

__________________
Teddy7 is offline   Reply With Quote