View Single Post
Old 07-19-2004, 09:00 PM   #5
e46boy
call me kev :D
 
Join Date: Dec 1969
Location: CA, AZ
Posts: 6,030
My Ride: '08 Lexus GS460
Send a message via AIM to e46boy
Quote:
Originally Posted by learthworml
My fenders are not rolled Kev. Yea that would put me around 30et on a 19x8. I know people fit 19x8.5 with 35 et. Half an inch larger than my 19x8, so .25 inches larger on the outter edge im guessing. So on 19x8 would that be an et of 29? So a 10mm spacer = 19x8 et 30? If that doesnt work then I think ACS sells 7mm spacers, not sure if they are hubcentric and fit non ACS wheels. I do not want it to rub, so I will go as agressive as possible without rubbing. 5mm might be to little and 10mm might be too much. I am not sure if I will even notice 5mm. Get back to me when you can. Thanks man.
yeah like tim said.. 8mm might be the choice here, i have running 235 on a 19x8.5et32, but my fenders are rolled.. don't bother with the 10mm, just a bit too much

go with 8 make sure you get spacers that are hubcentric too..
__________________

Bye bye E46, hello new car :D
e46boy is offline   Reply With Quote