E46Fanatics - View Single Post - DIY Wiring Harness for CCFL angel eyes kits
View Single Post
Old 12-02-2004, 10:00 PM   #5
Registered User
Join Date: Aug 2003
Location: ATX
Posts: 62
My Ride: 2k1 M3

When you go to install the the wiring harness and connect it to the angel eyes - crimp on bullet connectors at the end fo the harness and on the inverter box too. I reversed the male/female for the pos/neg to make sure that I didn't hook the wires to the wrong wire on the inverter.

Also - I left the T-taps loose for the trigger connections until I was ready to tap them. Crimp the T's when you're ready to actually connect them. If you do that you'll have an easier time running the wire(especially with the interior trigger wire b/c you have to push it through the firewall).
Attached Thumbnails
Click image for larger version

Name:	12 Bullets.JPG
Views:	2372
Size:	29.0 KB
ID:	100839   Click image for larger version

Name:	13 T-taps.JPG
Views:	2361
Size:	29.2 KB
ID:	100840  
Moeser09 is offline   Reply With Quote