E46Fanatics - View Single Post - DIY: UUC Pulley Install Enjoy!!
View Single Post
Old 10-02-2005, 05:38 PM   #3
Registered User
Join Date: Jul 2004
Location: Boston, MA
Posts: 1,015
My Ride: 88' BMW E30 SETA
Send a message via AIM to Ivegotissues666

Step 5:

Once both belts are removed now you can completely remove the bolts
for the 2 pullies. Once the bolts are removed you may now take off
the pullies please note that although difficult there is nothing else
holding those pullies on. I'm guessing it was just a tight fit by
design by BMW or something. The one that gave me the hardest time
was the lower one connected to the Power Steering Pump. I had to
keep wiggling and rotating the pulley before it eventually came off.
Just be patient and try not to damage your pulleys.

Ivegotissues666 is offline   Reply With Quote