View Single Post
Old 12-14-2005, 01:39 AM   #86
Registered User
Join Date: Sep 2004
Location: ELK GROVE, CA. 95758
Posts: 1,105
My Ride: Hpf m3,360,R8,M4
Originally Posted by dillard
1. key must be OFF
2. look at the cluster. there are two buttons. press and hold the left one down.
3. turn the key to position 1 (KLR).
4. continue to hold button for approx. 5 seconds after the key is turned to position 1 (you can let go of the key).
5. after about 5 secs you will see a message in the OBC. it will either flash OIL SERVICE or INSPECTION with "rESET SIA."
6. while the message is flashing, let go and then tap the same button you've been holding and the SIA will reset itself. the cluster will display "END SIA."

It worked on my wife's 323i ,Thank you
BLK BLUR is offline   Reply With Quote