View Single Post
Old 05-03-2006, 10:13 AM   #24
Registered User
Join Date: Feb 2006
Location: In a house
Posts: 21
My Ride: A car
Make sure you have the PAC-SWIX. If you do the only wires needed from the PAC-SWIX will be the

RED - Goes to switched power
BLACK - Goes to ground
YELLOW - Goes to White wire with red stripe and yellow dots in the steering column.

Quote from another post "You want to Tie the yellow cable from the SWI to the white/red wire with the yellow dots (some newer 3-series have wire colored white-gray with yellow dots) going into the steering wheel."

Originally Posted by sanman10535
Thanks for the info. One question though, I have connected all the wires and trying to program the PAC using the instructions on their site. It seems that steering wheel wire I connected may be a problem since I tried to program the buttons but it's not working yet.

Do I need to connect the white wire from the interface to another wire?

The site tells me that I need to use a resistor but I don't think I'll need that.
mrdecibel is offline   Reply With Quote