View Single Post
Old 07-20-2006, 08:49 AM   #3
Registered User
Join Date: Jul 2004
Location: Boston, MA
Posts: 1,015
My Ride: 88' BMW E30 SETA
Send a message via AIM to Ivegotissues666

Step 5:

Once everything is removed, cleanup the driveshaft center sleeving are of all the metal shavings, clean the splines free of grease since you will be reapplying new grease.

Step 6:

Installing the centering sleeve, simply apply some grease to the hole the sleeve will rest in. Now put the centering sleeve in the hole, it will need to be pressed in, well thats where your trusty mallet will come into play. The center sleeving is suppose to protude the slot 4mm. So in order to do this you must hammer the sleeve in with your mallet and keep double checking the measurements untill you get to or pretty damn close to 4mm.



Ivegotissues666 is offline   Reply With Quote