View Single Post
Old 08-15-2006, 08:58 PM   #20
BamBam26
Registered User
 
Join Date: Nov 2005
Location: GA
Posts: 364
My Ride: 323Ci, FJ Crusier
As I promised the update on the special tool needed. Instead of making a special tool all you need is a 16mm socket a extender and a socket wrench , also a 10 mm wrench, now all you have to do is place the 16mm socket on the tensioner bolt that untightens the belts put the 10mm wrench on the bottom nut on the pulley now rest the 10mm wrench on top of the socket and turn the fan screw with the 35mm wrench and that is it. The 10mm will put the pressure on the socket and hold the pulley in place so you can loosen the fan screw.
BamBam26 is offline   Reply With Quote