View Single Post
Old 08-26-2006, 12:24 PM   #4
Ivegotissues666
Registered User
 
Join Date: Jul 2004
Location: Boston, MA
Posts: 1,015
My Ride: 88' BMW E30 SETA
Send a message via AIM to Ivegotissues666










Heatsheilds removed and now easy access to the driveshaft bolts. To make it simple just remove the 3 bolts from the driveshaft to the flex disc (aka guibo) leaving the flex disc still attached to the transmission with give you something to hold onto while pulling the transmission out.



Hex nuts holding the center mount and bearing in place.





Removing center mount bolts..





Removing Driveshaft to flex disc bolts, I believe they were 18mm bolts.



Differential Bolts.





The differential bolts are star shaped and the sockets I had were labeled E-10, E-15, E-20 etc.. to like E-45 or E-50 don’t know the correct term but I picked up a set at AutoZone a couple years ago and they work flawlessly and are a perfect fit.













Ivegotissues666 is offline   Reply With Quote