DIY: Auto <---> 5 Speed Swap Lots of Pixs!!!
View Single Post
08-26-2006, 01:49 PM
Join Date: Jul 2004
Location: Boston, MA
My Ride: 88' BMW E30 SETA
View My Garage
Engine drain bolt I believe it is 13mm well for my 323i that is (I know it’s been reported a 14mm on other models though)
New crush washer and old drain bolt
A socket pivot joint is good to have for this occasion
Remove this covering, not sure if it was necessary to remove but I removed it anyways.
Disconnect your coolant level sensor plugs
And Hoses…. Inspect and replace as necessary
Where the auto’s oil cooler was removed, a little coolant will come spilling out.
Removed fan and fan clutch bolts using allen socket I believe it was 5mm since you don’t need either anymore.
Disconnecting more hoses…
Big gaping hole…
Check out my Other DIY's
Auto <---> 5 Speed Transmission Swap
Heated Steering Wheel
Heated Seat Retrofit
Power Seat Retrofit
Post-Cat + Pre-Cat O2 Sensors
OEM Footwell Lighting
Fog Light Retrofit OEM
View Public Profile
Find more threads by Ivegotissues666
Find More Posts by Ivegotissues666
Leave feedback for Ivegotissues666 (17)