E46Fanatics - View Single Post - DIY: Auto <---> 5 Speed Swap Lots of Pixs!!!
View Single Post
Old 08-26-2006, 01:12 PM   #20
Registered User
Join Date: Jul 2004
Location: Boston, MA
Posts: 1,015
My Ride: 88' BMW E30 SETA
Send a message via AIM to Ivegotissues666
Putting it together…

Step 12:

Now moving onto the UUC SSK + DSSR. I had forgot to order the shifting arm for some reason and this put me back about a week to wait for the part.

Anyways installing the bush bearing for the shifting arm. This is an idea of how it rests.

The vacant spot in your car…

Bush bearing installed, it will just snap into place fairly easily.

Installing UUC’s trans shifter into the shifting arm…

Loctite the small allen key bolts..

Shifting arm installed…

This locking pin is kind of tricky to get to snap in correctly.

From above…

Installing the SSK…

This can get quite frustrating, bolting up the DSSR or stock selector rod but just be patient. Make sure to grease the pins and secure the clips. And put the washers on if they apply to you (I guess some models physically can’t fit the washers).

Ivegotissues666 is offline   Reply With Quote