Just check to see if you have the pins for the "SoundSystem" which are below the large pins (15, 13, 16). If so, you should see pin 4, 8, 9 which are ground, Ext In R+, Ext In L+ respectively. You have to pull your cassette unit out and look at the large black plug. If you do post a picture of what you saw for benefit of others.
Note dont confuse the above with the pins for the CD-changer which are under the large pins - 11, 14, 12. See post #10 for the diagram.
Dinan Stage I S/W | ACS RSB | ///M FSB |UUC TMEs & Pulleys |Ate Slotted Discs | ScanGuageII | RockyMounts MTB Carrrier | OEM Rear Clears | LED Euro City Lights & Rear Fogs | Two-Tone Suede DIY | ACS Pedals | Bimmian Gauge Rings & M3 Face | Smoked Frnt Corners w/ Luxeon LEDs | EAS CF Roundels | JLevi Ti CF trim | Blk Suede shift/ e-brake boots | ECS Smoked Frnt Bumper Reflectors | DICE Duo
Last edited by vids_blk323Ci; 02-20-2007 at 11:56 AM.