E46Fanatics - View Single Post - UUC Under Drive Pulley Set DIY (instructions & pictures)
View Single Post
Old 06-27-2007, 03:13 PM   #8
E46Fanatics Owner
tim330i's Avatar
Join Date: Dec 1969
Location: SF
Posts: 11,978
My Ride: 03 Ti Silver M3
Originally Posted by NoVaDreier View Post
Great DIY. According to the Bentley manual, the water pump pulley torque should be 89 inch pounds not 16 ft-lbs.
I have updated the DIY with the info, thanks

QUESTION - is 16 ft-lbs = 192 in-lbs? If so that is what I was going to tq the bolts too but that seemed like way too much so I stopped. 89 in-lbs seems much more reasonable.

tim330i is offline   Reply With Quote