E46Fanatics - View Single Post - Carbon Project Belgium
View Single Post
Old 07-11-2007, 06:04 AM   #38
The Chosen One
Registered User
Join Date: Oct 2005
Location: BELGIUM
Posts: 2,550
My Ride: E46
milled lots of MDF.
milled some rings to put the woofers in.

checked it they were slanting enought, and screwed them tight

Here a picture of the bottomside, where he made wholes , to let the sound flow outside.

the height of the subbox is about 4,5mm.
It must be about 1/3 of the contour of the speaker, and they are 13cm,so

here you can see the busses he used.

will look like thise

still some more polyester work to do
did some preparation to stretch the cloth nicely

The triangles you see wil come in CF, in the middle he'll make a alu piece.

He milled some KUNGFU triangles in aluminium

I you mill this , take a low amount of rates/minute, and much oil.
I'f you're done, just throw the mill in the garbage

made only one model, and copied it


Last edited by The Chosen One; 07-11-2007 at 06:10 AM.
The Chosen One is offline   Reply With Quote