View Single Post
Old 08-13-2007, 06:15 PM   #18
luckysnafu
Registered User
 
Join Date: Feb 2005
Location: Worcester, MA
Posts: 491
My Ride: 03 ZHP|90 332(s52)
From the Bentley Manual:
Tightening Torques for REAR WHEEL DRIVE
- Control arm rear bracket (bushing bracket) to frame rails - 44 ft-lb
- Front end reinforcement to front subframe or body frame rails - 44 ft-lb
- Inner ball joint to subframe - 66 ft-lb
- Outer ball joint to steering arm - 48 ft-lb

Tightening Torques for ALL WHEEL DRIVE
- Control arm rear bracket (bushing bracket) to frame rails - 44 ft-lb
- Front end reinforcement to front subframe or body frame rails - 44 ft-lb
- Inner ball joint to subframe - 57 ft-lb
- Outer ball joint to steering arm - 48 ft-lb
- Inner ball joint to control arm - 59 ft-lb
luckysnafu is offline   Reply With Quote