E46Fanatics - View Single Post

The Chosen One · 12-26-2007, 04:15 AM

Cause he didn't want to change his original 16:9 screen in the console, he had to find a place for his ALPINE CDA-7998 Phantom Face.

He wanted to do this in the middle, under the armrest. Then he had to get of the front en extend it with cables. If this was an ordinary radio, no problem, but with this radio he didn't want to take the risk.
So looked for another option to place the radio, without doing harm to the looks of the interior.

Made little trolley to fasten the radio.
Hier een beugeltje wat ik gemaakt heb op de radio in vast te zetten.

Because he can only tighten this trolley with 2 screws, he made it extra strong. all made of iron.
The radio won't move a mini-mm, it's locked TIGHT !

He also weld the original sleigh of the radio onto it.

12-26-2007, 04:15 AM	#262
The Chosen One Registered User Join Date: Oct 2005 Location: BELGIUM Posts: 2,306 My Ride: E46 View My Garage	Cause he didn't want to change his original 16:9 screen in the console, he had to find a place for his ALPINE CDA-7998 Phantom Face. He wanted to do this in the middle, under the armrest. Then he had to get of the front en extend it with cables. If this was an ordinary radio, no problem, but with this radio he didn't want to take the risk. So looked for another option to place the radio, without doing harm to the looks of the interior. Made little trolley to fasten the radio. Hier een beugeltje wat ik gemaakt heb op de radio in vast te zetten. Because he can only tighten this trolley with 2 screws, he made it extra strong. all made of iron. The radio won't move a mini-mm, it's locked TIGHT ! He also weld the original sleigh of the radio onto it. __________________