E46Fanatics - View Single Post - Carbon Project Belgium
View Single Post
Old 01-06-2008, 12:47 PM   #275
The Chosen One
Registered User
Join Date: Oct 2005
Location: BELGIUM
Posts: 2,542
My Ride: E46
Here you can see where the remote control will slide into. As you can see, he put some selfclitting vilt on the sides, and the bottom.
Did this to make sure it all glides nicely...

You see the slot in the middle.
backside, tightened with that screw.

This alu plate lays on top, and is tightened with little screws. If there would be a problem, it's not hard to get into it all.

On the bottomside, you see he made something simple where he can get into with the finger, to glide it all out.

The thing in the car

It'll be super easy to control the radio. Nothin' will feel stodgy while riding the car.

All of this has to go in primer.
After that the console is going in satin-black, like he original was. the remote will be sprayed in the same silver as the rest (trims, ...)
The Chosen One is offline   Reply With Quote