View Single Post
Old 03-04-2008, 09:04 PM   #14
Registered User
Join Date: May 2003
Location: Roanoke
Posts: 780
My Ride: 2008 335i sport/prem
Originally Posted by nonford View Post
I had a bit of seeping that was running down the block by the filter housing (aggragate) that I was tracking for two weeks. Replaced the hose to the VANOS, replaced the oil seperator, and still had a bit coming back. Bought a new gasket for the housing that attaches to the block and replaced that this weekend. When I took that off, there was alot of black on the inner side and the gasket was really flattened out. Put the new one on and bolted her back up. Drove about 100 miles now and not a trace of oil. Hopefully I got it.
What all did you have to remove to get to that gasket??? I have the gasket but did not pull the "aggregate housing" because it did not appear to be leaking. However, if it's not too bad, maybe I'll go ahead and do it. I replaced the oil hose to the VANOS and the CCV and all associated hoses/gaskets. I skipped the aggregate due to time constraints but what the heck????
toddkageals is offline   Reply With Quote