View Single Post
Old 03-08-2008, 05:35 AM   #38
Registered User
Join Date: Feb 2008
Location: holland
Posts: 3
My Ride: bmw
Great DIY:

My experience:

-oil filter does not need to be opened (use a 5 mm hex L-wrenche to loose sensor)
-air filter, only remove the top-cover
-keep the old wiring in place, stuff the new sensor wire down the
motor compartment, this is the hardest thing to do, use a long small
stick to guide the wire down the engine, stick with your right arm
under the air intake and catch the wire and connect the sensor

when the engine starts, engine power should be back
as normal, fuel consumption will decrease again, engine wont stall anymore

throw a party
henkiee is offline   Reply With Quote