View Single Post
Old 06-05-2008, 08:43 PM   #323
fmzip
Registered User
 
Join Date: Jun 2003
Location: Northeast
Posts: 3,007
My Ride: 2001 330cic & 530i
Quote:
Originally Posted by Lemonsqr View Post
How hard are these to install? Is there a link to a DIY....too lazy to search this time

Get under the car, support tranny with a floor jack, remove the 4 bolts for the crossmember, remove the two nuts for the tranny mount that pass thru the crossmember. Once the crossmember is out, remove the nuts from the top of the tranny mount.

This takes all of 5-10 minutes.

Installation is as simple, make sure you secure the tranny mount to the crossmember first, install crossmember, lower tranny onto mount, attach top bolt.

It's imperative not to load the bushing before torquing it to 16ft lbs. 16ft lbs is not much more than hand tight. If you don't follow these simple guidelines, you have a good opportunity to introduce vibration.
__________________
fmzip is offline   Reply With Quote