View Single Post
Old 07-31-2008, 08:08 PM   #1
Keep it clean
aggieE46's Avatar
Join Date: Aug 2006
Location: Royse City
Posts: 8,066
My Ride: 03 Evo, 07 Passat
Send a message via AIM to aggieE46
Ideas for lube on UUC poly RTABs.

Guys, I'm at the end of my rope here. I've had my UUC urethane RTABs on my car for a year or so. I've had to remove them and re-lube them about 6 times because the noise is so increidbly unbearable. I'm getting a little miffed. I've used Energy Suspension poly bushing grease, Mobil 1 grease, white lithium grease. All the same results. I was told to try some brake no-squeal. I'm going to give that a try. Any other ideas? Alignment is correct, torque is correct. Lube was applied liberally, but not overkill, on all surfaces.
aggieE46 is offline   Reply With Quote
Ads by Google

Guests, get your FREE membership to remove this ad.