View Single Post
Old 08-27-2008, 09:59 PM   #8
NoVaDreier
Registered User
 
Join Date: Nov 2002
Location: Alexandria, Va.
Posts: 521
My Ride: 2001 325i
After removing the air filter housing, the fuel tank venting valve is located right under the front corner of the intake manifold directly behind the power steering fluid reservoir. See the bottom picture on page 113-7 of the Bentley manual. According to TIS 13 90 500, (1) disconnect the electric plug connection on the front of the valve, (2) release the bottom vent hose by pressing the locking bar and detaching, and (3) detach the rear hose from the venting valve. You might have to loosen the reservoir retainer and move the reservoir out of the way so you can get to the rear hose connection.
NoVaDreier is offline   Reply With Quote