View Single Post
Old 08-30-2008, 11:17 PM   #4
Registered User
Join Date: Aug 2008
Location: Phoenix
Posts: 179
My Ride: 2003 325i
When you compress the brake cylinder back into the caliper, to get the new pads to clear the rotor, you have to loosen the bleeder on the caliper to relieve the pressure, otherwise you can't press the cylinder back. When you do that brake fluid will, of course, come out of the caliper, and if you are not careful it will suck air back in through the bleeder.
sgtfury40 is offline   Reply With Quote