Thread: will this work
View Single Post
Old 10-05-2008, 09:03 AM   #2
_Calle_
Registered User
 
Join Date: Mar 2008
Location: NRW Germany
Posts: 80
My Ride: 330Ci ESS TS2
Send a message via ICQ to _Calle_
This works very well!
in Germany there are some this have made.

Variation 1 on 3.0 l (base: M50 grey iron block):
Crankshaft of the M3 3.0 US implementation. This has towards of the "normal" M3 crankshaft the advantage that the connecting rod plugs measure 45 mm (otherwise, 50 mm) and one is not bound therefore to the substantially more expensive M3 connecting rods. Moreover, KW of US-M3 is substantially more favorable.
Connecting rod 135 mm or US-M3 3.0/3.2
piston 86 mm of US-M3 3.0
The block must be drilled out on 86 mm.
ZK poetry is natural to use from US-M3 3.0/3.2 then (11 12 1 405 106) compressions corresponds to the M3 3.0 USA

copied from seite http://wp1016621.wp027.webpack.hoste...140/f01140.htm
__________________
_Calle_ is offline   Reply With Quote