View Single Post
Old 10-06-2008, 11:45 AM   #3
Registered User
Join Date: Jun 2006
Location: Michigan
Posts: 31
My Ride: 2000 323 Ci
I usually use a small amount of silicone based lube on the pins because it seems that the rubber bushing sticks to them if I don't and this causes squeak. It seems that the bushings move and flex a bit within the caliper instead of having everything move just in and out on the pin. This is why I am asking about an adhesive. The old bushings were locked firmly in place but I am assuming this is from age and heat.
sugi323CI is offline   Reply With Quote