I believe that as long as you are getting the 66 mm bushings pre-pressed in the carriers that you should be fine. I would verify that with whoever you purchase from though. Ruben at DMW can take care of you for sure.
Originally Posted by killer325CI
I just got my control arms in and looked at the writeup to do the replacement and realized I should have got the kit with the FCABs. Doh! Now I am looking at getting the Meyle HD ones but have a question. I have a 2001 325Cic and can't find a straight answer as to order the 60 or 66mm ones. But I found ones with the retainers at 66mm. Can I use those no matter what? Even if the stock ones are 60?
Thanks - Keith
04 IR 330i ZHP | ESS TS2+ SC | MagnaFlow "headers" | KMS 3.64 LSD | AST 4100 550/650| APEX ARC-8 18x9 | H&R front sway bar | Vorshlag camber plates, RTAB limiters | TMS subframe & swaybar reinforcements | UUC SSK & DSSR | UUC TM & TME | BW motor mounts | Dinan strut & shock tower bars | vaio 4-bolt oil pump