I'm in the process of putting one together. I should post later this week once I'm done with my finals. As far as parts, there are two filters needed (1-per sensor). Each is made of one 1Mohm 1/4W resistor and 1uF cap. And little wire, soldering iron, heat shrink and elec. tape as well.
Headers - KW V2 - Hotchkis Sways - 55w 6000k HID - 35w 6000k HID fogs
EVO 3 SSK mit ein DSSR - EE Tails - Meyle LCA, FCAB, & RTAB w/ Rogue Limiters - M3 Mounts ....
ASME & SAE Member