View Single Post
Old 12-09-2008, 01:15 AM   #6
330i ZHP
Registered User
 
330i ZHP's Avatar
 
Join Date: Mar 2005
Location: Washington, DC
Posts: 21,820
My Ride: have 5 doors and FI
Send a message via AIM to 330i ZHP Send a message via Yahoo to 330i ZHP
if you dont have them - you will need to bung plugs (sounds funny) but they are large (about 1in or 2to3cm) bolts with brass ring gaskets - those will need to be screwed TIGHTLY into the two unused holes.

If you use 16 gauge wire and solder it on each end - you will be sufficient in wire size - also try to use shrink tubing at connection points and then further protect with electrical tape. make certain to run the wires AWAY from the headers and exhaust so you dont get burns or damage to the wiring
__________________
/_________\
O==[][]==O
330i ZHP is offline   Reply With Quote