Thread: Motor mounts
View Single Post
Old 12-15-2008, 07:23 PM   #15
david @ eas
Past Site Sponsor
Join Date: Mar 2008
Location: SoCal
Posts: 4,226
My Ride: E46 M3
Rogue also carries Performance Motor Mounts for your car. If you have any questions on the mounts feel free to send me a PM or you can check our website here:

Rogue Engineering - Performance Engine Mounts (most BMWs)

Just like factory, but better
The factory-like design incorporates the anti-rotational tabs ensuring that the mounts do not rotate. Use of these mounts virtually eliminates all deflection created from the engine. This is especially true for high-powered vehicles such as those with turbos or superchargers.

The internals of the mount feature a unique locking system in the event of a crash, the internal hardware of the mounts prevent complete failure of the mount. Whereas the integrity of the mount will be compromised, its internal construction prevents the mounts upper and lower plates from completely tearing away from each other. Whereas this may seem to be a small feature, this will ultimately decrease the chances of the engine from breaching the firewall, and entering the internal compartment of the vehicle. No other performance mount can make this claim.

Models Supported:

All e30 3-series models, including M3
All e36 3-series models, including 318ti
All e46 3-series models, including M3
All e36/7 Z3 3-series models, including MZ3/MZ3C
All e85 Z4 models, including MZ4/MZ4C
david @ eas is offline   Reply With Quote