E46Fanatics - View Single Post - E46 Radiator DIY
View Single Post
Old 12-17-2008, 09:22 PM   #15
Registered User
Join Date: Dec 2008
Location: Orlando, FL
Posts: 41
My Ride: 2003 330i
Originally Posted by dooodxitzxmeeh View Post
Great post on the DIY expansion tank for the e46.. my only concern was when i unclip the top 2 hoses, and the side one, i pulled with all my might as describe and no go.. i ended up sticking my arm down there to see what else..

*** there is a bottom clip... left side of the tank by the fan.. if u look down with a light you can see it sticking half out.. reach down and pull to the left.. or use a long flat head to do it.. *** there is a total of 4 clips to remove the expansion tank excluding the sensor clip. 2 on top..1 on the side.. and 1 on the bottom.. you do not have to remove the sensor clip if u remove the 4 clips.. then u tug up and out the sucker goes.. once thats done u can get to the sensor a lot easier.. never had to jack the car up once..

oh and as you can see i removed the filter to get acess to the tank.. hope adding this to the thread helps

Even if you unclip that one it's still a ***** to get it out.
ras2247 is offline   Reply With Quote