View Single Post
Old 01-17-2009, 03:00 PM   #27
sillieidiot
Registered User
 
Join Date: Sep 2004
Location: the OC
Posts: 44,126
My Ride: '06 AW 330ci
Send a message via AIM to sillieidiot
Quote:
Originally Posted by Massimiliano View Post
Great information. I think my igniter is failing and I may have to replace it.

While I'm in there, I would like to open up the hole for the city lights. I've brought the car to Italy and were supposed to use these. The local shop can flash the LCM to enable them and run the wires, but they are not sure how to drill out the plug. I'm up to try it. Any advice?
there is already a hole for the city lights. on the back of the headlight, you will see the circular outline of where the city lights should go (if you're looking from the back, look at the high beams and its on the upper right). that's where you want to drill out a hole. make sure you drill out just big enough for the bulb holder.

for the bulb holder, just look for a 194 bulb holder, and that will work. good luck.
__________________
I like to reply to threads with 0 posts




Have a lighting problem? Read this first:
Lighting-related Troubleshooting Guide
sillieidiot is offline   Reply With Quote