View Single Post
Old 01-29-2009, 01:35 PM   #4
Registered User
Join Date: Aug 2003
Location: Annapolis MD / San Diego CA
Posts: 192
My Ride: 2004 JB M3
Send a message via AIM to blownE30M3
You don't need a top of the line stud finer and you don't need to cut a hole.

Use a small screwdriver (eyeglass or watch) and poke through the drywall where you think the stud is located. You can tell by the resistance if it is a stud or not.

Home Automation and A/V Programming
blownE30M3 is offline   Reply With Quote