View Single Post
Old 02-21-2009, 09:59 AM   #1
Registered User
Join Date: Dec 2007
Location: Edison, NJ
Posts: 4
My Ride: 2004 325Ci
Ballast exchange help

I need some help regarding the following problem..

i've been having flickering problems with the driver side hid (aftermarket, mcculloch brand) and switched the bulbs and the problem did NOT follow, hence i concluded that it must be the ballast or ignitor.

now i know very little about these cars, and even less about electrical work, but have been able to switch the bulbs,etc. is it most likely the ballast since there is also a clicking sound coming from the problem side?

How do i go about fixing the ballast? it is a mcculloch aftermarket kit, so do i have to have that brand ballast or can i use just about any brand, generic?

.. how do i go about replacing the ballast? it is a mcculloch brand aftermarket hid. does it matter what brand the ballast is, etc??? where can i just get a ballast to replace it.

thanks for any advice
parikhrr is offline   Reply With Quote
Ads by Google

Guests, get your FREE membership to remove this ad.