E46 Fanatics Forum banner

SoCal Installer & Rim Rebuilding & Fender Rolling Rental (:

96K views 974 replies 94 participants last post by  omhl 
#1 · (Edited)
Hey guys, so it's official. I'm a E46F Sponsor, and now offering my services. Feel free to pm me if you need any work done. I will be updating this thread with more pictures of my work & prices.

My old thread got deleted but it's okay, time to start a new one. :)

Suspension Work
---

- Coilovers w/ Full Adjustments - 100$ bucks.
- Sway Bars - 30$ each side.
- LCA Bushing - 80$ includes bushing being removed & press if required.
- RTAB Bushing - 80$
- LCA Arm Replacement - 150$
- Brake Change - 20$

Engine Work
---

- Valve Gasket Seals - 80$
- Oil Change & Filter Change - 20$ bucks, bring your own oil.
- Air Filter Change - 5$ bucks, bring your own air filter.
- Spark Plug Change - 20$ bucks, bring your own spark plugs.
- Oil Sender - 30$ bucks, bring new oil.
- Differential Fluid Change - 20$ bucks.
- Transmission Fluid Change - 20$ bucks.
- Differential Swap - 250$ + 50$ if you need your differential bushing changed.

Headlight Retrofit - 150$ and you bring your own projectors. I recommend the FX-R's they work great.

I can pretty much do anything, involving wiring, retrofitting, I have experience in a lot of things lol. I even do air suspension! I can also rebuild rims :)

If you would like to rent the fender roller it is 50$ bucks + a 200$ deposit just incase you ruin or break or steal my tool.

If you can vouch for me, or have gotten work done by me please vouch :)

Here is some picture of my work..

I just rebuilt a set of step lipped vsxx in 18's.


I have installed alarm systems a couple times, I do it the stealth way involving wire loom, soldering, and tucking all the wires.


Here's my fender roller,


Rerouting my air suspension hoses,




Most work will be done in my driveway, if it is a pain in the ass job I'll pull it into my lift at the shop but I don't like to go there because it takes away customers from my pops.
 
See less See more
5
#224 ·
Just got my Differential bushings (2 x front, 1x rear) replaced by Cholea yesterday, what a tedious job, but you made it. Thanks Cholea and your friends, Peter and Charlie, you guys rock and creative.
I***8217;m having jobs lining up for you to take care my other bimmers. For sure, I will bring heater next time, LOL.
 
#249 ·
yeah, it was for the stupid abs speed sensor. i got piss and took my time resoldering the wires neatly and it worked. i took my buddies obd 2 scanner and cleared it and drove around the block and it cleared all the lights....
 
#257 ·
Sorry for all the late replies, school has got me super busy. And yeah, as long as your rims are either 2 piece or 3 piece I can build them. Custom powdercoat them, bigger lips, etc. Anything you want.

pmed on the manual transmission change.
Can you powdercoat stock 19" M3 wheels?

If so, what kind of turn-around time and how much? Thanks in advance.
 
#261 ·
I haven't gotten my new oven just yet. Still on the market on getting a good oven!

@epenbecks, Take a picture of the back of the rim, I need to see if it can be seperated. Those rims could possibly just be glued on rivets and it would just be a single cast rim.

@Darkside, I can repair curbs but if its painted I can't fix that lol. You'd have to repowder the whole thing.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top