E46 Fanatics Forum banner

Bmw e46 323ci on AC Schnizter (Spain)

10K views 29 replies 16 participants last post by  Celituning 
#1 ·
Hi! I'm Carlos from Spain.

Here I present this BMW E46 323CI property of my brother.

Only three important mods, full smoked look, VMAXX X-trem Coilovers and AC Schnitzer's 3101A 8,5"x17 et13 (painted in Electric Orange from Focus ST) on 205 40 17 tyres.

Coming soon, orange look in indicator lights

Here the pics:





























Hope you like. Greetings!
 
See less See more
14
#17 ·
I did mine OEM look but gained about 1.5 inches of clearance by rolling and pulling the fenders. I have -3 degrees of camber in back and -2.5 in front.

You'll need to get some 245/40/18s for the rear and 235/40 for the front. Maybe go 1 size smaller (235 and 225) if you wanted to play it safe.

You'll also need camber plates for the front so you can fine tune everything.

If it were me, I would try it.

If you don't want them, how much are the wheels selling for? :)
 
#21 ·
I have ordered the outer lips.

I tried the result with the maximum negative camber that I could made with stock adjustment. I could have -3.5º in the rear axle.

The result is good, the upper part of the wheels came inside 6mm:



In the oder hand, with "only" 2º:




I need to milling the hub and rotor to put 3mm more inside.

And I continue with the refubish job.

 
#23 ·
Some news:

Center painted in powder coating with Seal Gray Metallic from Porsche:



Inner Lips painted in satin black:










I have bought the outer lip in felgenfuchs, but the polish isn´t good, I wanted heavy gloss finish. I polished all lips:

From this:



To this:







Rear lip (3.25")





Front lips (2.75")







and finally, the wheels:



 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top