NEW! UUC stainless steel brake lines available for all E46 - intro special!

Rob Levinson * UUC Motorwerks · 01-06-2005, 04:20 PM

(actual product differs slightly in appearance)

"Performance tune" your braking system.

Stainless steel brake lines for improved braking performance

100% MADE IN USA and DOT-APPROVED
Original brake lines are rubber and can expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel, and makes for mushy pedal feedback.

UUC's Stainless Steel Brake lines are used to "performance tune" your braking system.

* Inner Teflon® line is covered with woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. Results will be immediate.

Technical features:
fully compliant with DOT Standards (MVSS-106)

lines burst-tested to 6000psi
(maximum tested pressure from a BMW braking system is 1200psi)

Teflon® inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (translucent blue plastic covering).

plastic end pieces protect assembly, no exposed steel fibers to stick fingers.

Introductory pricing:

$95 4-line kit for 1999-2005 3-series and M3

CLICK HERE TO ORDER
Professional installation recommended.
Installer responsible for correct fitting and bleeding procedure as recommended by BMW.
As brake line installation is a safety-related item, installer assumes all responsibilities and risks associated with brake line replacement.

Rob Levinson * UUC Motorwerks · 01-07-2005, 01:11 PM

This is the E46 kit:

Staszek · 01-07-2005, 01:12 PM

ohhhhhhhh nice!

opelrsx · 01-07-2005, 01:33 PM

what are the benefits? Also, how about the installation costs?

Alex · 01-07-2005, 02:53 PM

Quote:

Originally Posted by opelrsx

what are the benefits? Also, how about the installation costs?

He posted the benefit:

Quote:

Originally Posted by Rob Levinson * UUC Motorwerks

Original brake lines are rubber and can expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel, and makes for mushy pedal feedback.

BTW, Very nice product Rob

Rob Levinson * UUC Motorwerks · 01-07-2005, 03:15 PM

Quote:

Originally Posted by opelrsx

Also, how about the installation costs?

Installation is pretty easy, just uncscrew the original fittings and screw the new lines in. You have to bleed the brake system afterwards, but that's also a good idea (brake systems should be bled ever 12-30 months depending on usage style).

If a shop were doing the installation, figure 1-2 hours max. If you are already having a brake service done (new pads/rotors), then the lines should only add another 30 minutes' worth of labor.

- Rob

Edison@JleviSW · 01-07-2005, 03:25 PM

If only this were a DIY install (I don't have a break bleeding system

) I would do it

Rob Levinson * UUC Motorwerks · 01-07-2005, 03:29 PM

Quote:

Originally Posted by BMWERKEN

If only this were a DIY install (I don't have a break bleeding system

) I would do it

A pressure bleeder is really not that expensive... heck, a lot of people make their own from a Home Depot pressurized sprayer bottle, some hose, and a spare brake reservoir cap.

- Rob

Presns323i · 01-12-2005, 11:32 PM

ahhhhhhhhhh let me think about this one.........

InSuboRdiNaTioN · 01-12-2005, 11:38 PM

Any idea how long the introductory pricing will last? And what the price will be after that? Thanks

JCz04Bimmer · 01-12-2005, 11:42 PM

Saw these today over at UUC's shop. Very nice product and a decent price too. Too bad these came a few weeks to late. I just did a full brake pad/fluid change. No need to go through that process again anytime soon. Maybe in a few months?

KillFox · 01-13-2005, 04:55 AM

lol you release them a week after I buy my new brakes and lines....

LakeShow · 01-13-2005, 05:35 AM

Sweet product Rob

Staszek · 01-13-2005, 10:50 AM

Quote:

Originally Posted by JCz04Bimmer

Saw these today over at UUC's shop. Very nice product and a decent price too. Too bad these came a few weeks to late. I just did a full brake pad/fluid change. No need to go through that process again anytime soon. Maybe in a few months?

Ditto! If I hadnt just done a complete change and flush a month ago I would put these on now as well!

KillFox · 01-13-2005, 02:43 PM

Just ordered a set

I liked your's so much, I am going to send my Turner Motorport ones back lol. Another awesome addition to the UUC product selection.

Rob Levinson * UUC Motorwerks · 01-13-2005, 07:49 AM

Quote:

Originally Posted by InSuboRdiNaTioN

Any idea how long the introductory pricing will last? And what the price will be after that? Thanks

I think the $95 program price is scheduled for a few weeks. After that, they may be $129.

- Rob

Carbon_Fiber · 01-13-2005, 10:17 AM

How much is installation usually for such parts?

Rob Levinson * UUC Motorwerks · 01-13-2005, 10:20 AM

Quote:

Originally Posted by Carbon_Fiber

How much is installation usually for such parts?

You get a brake fluid flush done at the same time. I would expect a shop to charge 2 hours or less.

- Rob

01-07-2005, 01:11 PM	#2
Rob Levinson * UUC Motorwerks Sponsor Join Date: Dec 1969 Location: NJ Posts: 3,883 My Ride: 7s, M5s, M3s, others View My Garage	Updated Pic This is the E46 kit:

01-07-2005, 01:33 PM	#4
opelrsx Registered User Join Date: Apr 2004 Location: Vancouver, BC Posts: 428 My Ride: '04 330CI Mpack View My Garage	what are the benefits? Also, how about the installation costs? __________________ 2k4 330CI Mpack JET BLACK -- GONE

01-12-2005, 11:32 PM	#9
Presns323i No Show, No Go Join Date: May 2003 Location: Oak Park, S.Cali/UCIrvine Posts: 11,214 My Ride: E46[Retired], 2.0T View My Garage	ahhhhhhhhhh let me think about this one......... __________________ My Site

01-12-2005, 11:42 PM	#11
JCz04Bimmer Registered User Join Date: Apr 2003 Location: Boston Posts: 3,369 My Ride: 2004 330Ci & 06 Z4MC View My Garage	Saw these today over at UUC's shop. Very nice product and a decent price too. Too bad these came a few weeks to late. I just did a full brake pad/fluid change. No need to go through that process again anytime soon. Maybe in a few months? __________________

01-13-2005, 04:55 AM	#12
KillFox Registered User Join Date: Jun 2004 Location: Seattle, Washington Posts: 931 My Ride: 2001 330xi View My Garage	lol you release them a week after I buy my new brakes and lines.... __________________ Sig by 325i-Vizon

01-07-2005, 03:25 PM	#7
Edison@JleviSW 1.888.JLEVISW Join Date: Apr 2002 Location: Santa Clara Posts: 28,337 My Ride: BMW Duh View My Garage	If only this were a DIY install (I don't have a break bleeding system ) I would do it

01-13-2005, 05:35 AM	#13
LakeShow Millennium Bankers Mortgage Join Date: Apr 2004 Location: Home of the Purple & Gold Posts: 5,510 My Ride: is almost finished! View My Garage	Sweet product Rob __________________ EUROPROJEKTZ LakeShow1.com Supporting Sponsors: * DPE * Euro-Spec * Technik * WestCoast Auto Sound * MYSPACE

01-13-2005, 02:43 PM	#15
KillFox Registered User Join Date: Jun 2004 Location: Seattle, Washington Posts: 931 My Ride: 2001 330xi View My Garage	Just ordered a set I liked your's so much, I am going to send my Turner Motorport ones back lol. Another awesome addition to the UUC product selection. __________________ Sig by 325i-Vizon

01-13-2005, 10:17 AM	#17
Carbon_Fiber Banned Join Date: Sep 2004 Location: CA Posts: 59 My Ride: zoom zoom zoom.. View My Garage	How much is installation usually for such parts?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread: