![]() |
![]() |
|
|
||||||
|
Australia
Check out other E46Fanatics members rides in the Enthusist Directory! If you don't have your garage setup, sign up today HERE |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
|
|
#1 |
|
Registered User
Join Date: Dec 2008
Location: Riverside: Melbourne
Posts: 11,197
My Ride: 325Ci ClubSport
|
Tyre Pressure ... what's yours?
![]() when pumping up ur tyres what tyre pressures do u guys use? ive also heard of using different pressures on the front than on the back to promote understeer/oversteer ... anyone doing this? thanks -Peter |
|
|
|
|
|
#2 | |
|
Registered User
Join Date: May 2007
Location: Sydney, Australia
Posts: 1,913
My Ride: 325Ci M Clubsport
|
Quote:
As an aside i've found that a some complaints about understeer & tramlining are actually due to worn FCAB's.
__________________
![]() BMW 325Ci MY2004 Individual //M Clubsport Edition, //M Clubsport package, //M Sport 18"s, Manual //M Short Shift, Carbon Black, Black Aluminium Cube Interior. |
|
|
|
|
|
|
#3 | |
|
Registered User
Join Date: Jan 2005
Location: Sydney,Australia
Posts: 1,334
My Ride: MY04 E46 330ci Indiv
|
Quote:
__________________
![]() 6 speed short shift man with Aluminium cube interior, MTech II bodykit 19 inch Hamann reps with Dunlop SP Sport Maxx, Factory TV and Nav, upgraded audio with Alpine, Lanzar and Phoenix Gold Components Individual Colour Tannin Green |
|
|
|
|
|
|
#4 |
|
Registered User
|
I just ran the same all around on the M3 and M Coupe when I had them. I don't reckon you push the car enough on the street to really worry about it too much in a F/RWD setup.
My M3 was corner weighted though.
__________________
|
|
|
|
|
|
#5 |
|
Registered User
Join Date: Dec 2008
Location: Riverside: Melbourne
Posts: 11,197
My Ride: 325Ci ClubSport
|
ive got 34 all around..
i might to what uve got Brad.. |
|
|
|
|
|
#6 |
|
Registered User
|
220 front / 260 rear for standard load as per the placard inside the driver's door, checked when tyres cold
__________________
![]() |
|
|
|
|
|
#7 |
|
Registered User
Join Date: Jan 2005
Location: Sydney,Australia
Posts: 1,334
My Ride: MY04 E46 330ci Indiv
|
My tyre Placard reads 260kpa (38psi) Front and 310kpa (44psi) rear.
For the standard staggered 18'sHave found this to be ok for long distance cruising (giving slightly better fuel economy). But for day to day running I use 36psi front and 38psi rear . ![]() If I run my front at 34psi with the 19's it tramlines....... and the rear at anything over 40psi it skips a bit in bumpy twisty sections.... Hope this helps..........
__________________
![]() 6 speed short shift man with Aluminium cube interior, MTech II bodykit 19 inch Hamann reps with Dunlop SP Sport Maxx, Factory TV and Nav, upgraded audio with Alpine, Lanzar and Phoenix Gold Components Individual Colour Tannin Green |
|
|
|
|
|
#8 |
|
Registered User
|
I run 38 cold all around on the 19's, doesn't seem too harsh.
__________________
2005 PY M3
![]() |
|
|
|
|
|
#9 |
|
Registered User
Join Date: Aug 2006
Location: Sydney, Australia
Posts: 3,890
My Ride: 05 325CiC Individual
|
40 PSI all round.
__________________
![]() |
|
|
|
|
|
#10 |
|
Registered User
|
|
|
|
|
|
|
#11 |
|
Registered User
Join Date: Aug 2006
Location: Sydney, Australia
Posts: 3,890
My Ride: 05 325CiC Individual
|
Because that is what I was advised to put in them by Continental
__________________
![]() |
|
|
|
|
|
#12 |
|
Registered User
Join Date: Mar 2008
Location: Canberra, ACT, Australia
Posts: 3,410
My Ride: Ex 325CI owner
|
40 f, 44 r.
|
|
|
|
|
|
#13 |
|
Registered User
|
lol 40 is too high indeed. i run 32s F 33s R
__________________
![]() 08' 335i M Sport 00' MB E55 AMG 87' BMW E30 325e 99' BMW E46 323i - SOLD 05' TRD Aurion SL3500 - SOLD |
|
|
|
|
|
#14 |
|
Registered User
|
Like Brad, 34 front, 36 rear. However, I dropped down from 37F / 39R just to try the lower pressure and prefer the feel with the higher pressure, so I will go 36F / 38R. I only have 17s though.
+1 for FCAB change fixes a lot of direction stability issues, and also to Wilawok's comment about tyre pressure playing a part in that.
__________________
![]() I can help with * Reading Codes / Coding your car * R&R FCAs, Tie Rods, Sway links.... * RTABs Need an RTAB tool? Or clutch fan and water pump tools? PM me. |
|
|
|
|
|
#15 |
|
Registered User
|
32psi cold F and 34psi cold rear.
|
|
|
|
|
|
#16 |
|
Registered User
|
38 all round
__________________
![]() FOR SALE! |
|
|
|
|
|
#17 |
|
Registered User
Join Date: Dec 2008
Location: Riverside: Melbourne
Posts: 11,197
My Ride: 325Ci ClubSport
|
what are FCAB's?
|
|
|
|
|
|
#18 |
|
Registered User
|
|
|
|
|
|
|
#19 |
|
Registered User
Join Date: Dec 2008
Location: Riverside: Melbourne
Posts: 11,197
My Ride: 325Ci ClubSport
|
^^ oh k ye i need mine replaced
|
|
|
|
|
|
#20 |
|
OEM ///Member
Join Date: Dec 2004
Location: Brisbane, Australia
Posts: 2,019
My Ride: 1990 E30 318is
|
40 psi all round too.
__________________
![]() |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|