people with ATE PremuimOne Rotors...

615bimmerboy · 11-23-2010, 07:11 PM

thoughts on these rotors?
should be pickin some up here in the next few weeks just wanted to get some advice on them....
any issues with rust?
im probably gonna pair them with Akebono ceramic pads...

lemme know what you think!

hummer · 11-24-2010, 10:47 AM

Are those are the ones with the atomic energy type pattern of slots? If so, they worked well on my wifes Audi, but the pad lift was cut in half. Street cars should stick with smooth rotors!

615bimmerboy · 11-24-2010, 01:52 PM

Quote:

Originally Posted by hummer

Are those are the ones with the atomic energy type pattern of slots? If so, they worked well on my wifes Audi, but the pad lift was cut in half. Street cars should stick with smooth rotors!

YEP those are the ones, im guessing you meant to say pad life, not lift.

what pads did you use and how many miles did you get out of them?

Ziuck · 12-01-2010, 03:18 PM

I've had them on the front of my car for about 30k miles with Axxis Deluxe pads and still have about 50% pad left.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-24-2010, 10:47 AM	#2
hummer Registered User Join Date: Apr 2003 Location: Haverhill, MA Posts: 3,260 My Ride: 2001 330CI View My Garage	Are those are the ones with the atomic energy type pattern of slots? If so, they worked well on my wifes Audi, but the pad lift was cut in half. Street cars should stick with smooth rotors!

12-01-2010, 03:18 PM	#4
Ziuck Registered User Join Date: Feb 2006 Location: Indy Posts: 61 My Ride: E46 View My Garage	I've had them on the front of my car for about 30k miles with Axxis Deluxe pads and still have about 50% pad left.