![]() |
![]() |
|
|
||||||
|
Lighting & Mobile Electronics (I.C.E.)
Xenon lighting, HID kits, fog lights, BMW head units, navigation, speakers, subwoofers, In Car Electronics (I.C.E.), carputers, DDEs, angle eyes, halos, LED tail lights, interior lighting, etc. |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
|
|
#1 |
|
Registered User
|
FS:1500w Amp, 7-Band Equalizer.....
I have a 1500watt Audiofonics ADF-243 Amplifier for sale. Works perfectly!!!
Asking $115 shipped anywhere in the USA! Product Features: •2 channel [2 ohm] 300w x 4 •2 channel [4 ohm] 200w x 4 •1 channel mono [4 ohm] 600w x 1 •2 ohm load capacity •Variable low [30-500hz] pass filter •Variable high [50-1Khz] pass filter •Subsonic Filter [10Hz - 100Hz] •Bass boost •W x L x H: 270 x 358 x 32mm [10 5/8" x 14 1/16" x 11/4" ![]() ![]() Also, I have a Clarion EQS746 7-Band Graphic Equalizer for sale! Works perfectly too! Asking $70 shipped anywhere in the USA! Product Features: 7-Band Rotary Equalizer 12 dB Boost/Cut at 50 Hz, 125 Hz, 345 Hz, 750 Hz, 2.2 KHz, 6 KHz, and 16 kHz Auxiliary Input with Source Select Switch Adjustable Aux Input Sensitivity Subwoofer Output Level Control Gold-Plated Preamp Inputs and Outputs Rotary Volume Control and Fader 6-Channel RCA Outputs Selectable 60/90 Hz Low-Pass Crossover Crossover Slope: 12 dB/octave Maximum Output Level: 7V RMS Input Sensitivity: 50mV-4V RMS Signal-To-Noise Ratio (S/N): 105 dB Frequency Response: 10-50,000 Hz Total Harmonic Distortion (THD): 0.005 % Input Impedance: 10K Ohms Output Impedance: 50K Ohms Stereo Separation: 82 dB @ 1 kHz Dimensions: 7" W x 1" H x 4" D ![]() Or can have both shipped for $200 anywhere in the USA! Text or PM at 863-832-1123 if your interested! Last edited by TwoFastFurYa; 01-23-2012 at 10:11 PM. |
|
|
|
|
|
#2 |
|
OEM ///Member
|
so the eq only has 2 input channels?
|
|
|
|
|
|
#3 |
|
Registered User
|
|
|
|
|
|
|
#4 |
|
OEM ///Member
|
yeah, im trying to find an alternate to my Audicontrol DQXS, so i need something with 3 input channels.
![]() Thanks, but this one isnt for me. Im gonna have to break down and send it in to them and bit the repair cost. |
|
|
|
|
|
#5 |
|
Registered User
|
ok thanks for the interest tho : )
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|