fitment question

hey guys,

i'm looking at a set of acs type 2. they're 19x8.5 et15 with 215/35 and 19x9.5 et22 with 235/30. i have cut fenders and am planning to run some camber on these, will i have any clearance issues? i could pull the fenders a bit as well. let me know, thanks!

-coby

long story short. Yes.

Originally Posted by rcsummers

long story short. Yes.

Nawww. im running 215/225 on 8/9+20 all around. if he runs camber arm's and switches that 235 to a 225, and that 225 to a 215, then easy duz it.

edit. front already has 215.

i had a feeling that the rear tires needed to be switched. thanks guys! also, can anyone give me a rough estimate of how much camber this would be/look like?

Originally Posted by COBYATCH

i had a feeling that the rear tires needed to be switched. thanks guys! also, can anyone give me a rough estimate of how much camber this would be/look like?

both car's here: me and a local, running either 8" or 9" both 20 offset in rears.

looks good! just the right amount of camber i was looking for. thanks again

Originally Posted by COBYATCH

looks good! just the right amount of camber i was looking for. thanks again

good luck