Will these 19" wheels fit my sedan okay?

I'm looking into purchasing a set of wheels with tires on them. Will they fit onto my 2000 328i sedan without rubbing? If not, what would I have to do to make them work? My car is at stock level. here's the ad for the wheels: http://newyork.craigslist.org/lgi/pts/3307441406.html
Thanks a lot

Sent from my Transformer TF101 using Bimmer App

im not good with non-m's but it should work just fine.

Jeez thats gonna require a fender roll. And maybe a different tire size on rear,
But it can work for sure, with a little dial in....

Fronts are fine

If i get the fenders rolled do you think the tires would be okay?

Sent from my Transformer TF101 using Bimmer App

At stock height you might get away with it, but those wheels & tires at stock height is probably not a great look.

I think you will rub for sure with those tires and that offset.
A more narrow tire and maybe camber work will be needed.
If lowered

I know with a stock body, 19" wouldn't look great but I am getting mtech bumpers and side skirts which should make it look for proportionate. Anybody have experience puting bigger wheels on a sedan?

Sent from my GT-N7000 using Bimmer App

i had the exact same setup

except my rear offset was 45mm with the same tire size and was lowered on HR sport suspension

i put 5mm spacers (effective offset 40mm) after i rolled the fenders, it still rubbed from time to time,



so, can you imagine 33mm offset?

like i said, you may get away with it on stock height, but big rims and narrow tires with a large wheel gap to fender will not look good, especially with the tire/rim out past the fender, so a narrower tire (stretched) and camber work will be necessary if you want to lower it.

I tried to put 19 in. on mine, but it wasted more gas and rubbed. Not worth compromising the ride quality. They look nice but not a fit for 3 Series.

Thanks for the input everybody

Sent from my GT-N7000 using Bimmer App