Rear Wheel Bearing and ebrake problem - E46Fanatics E46 BMW Social Directory E46 FAQ 3-Series Discussion Forums BMW Photo Gallery BMW 3-Series Technical Information E46 Fanatics - The Ultimate BMW Resource BMW Vendors General E46 Forum The Tire Rack's Tire Wheel Forum Forced Induction Forum The Off-Topic The E46 BMW Showroom For Sale, For Trade or Wanting to Buy

Go Back   E46Fanatics > Tuning & Tech > Suspension & Braking Forum by BimmerWorld

Suspension & Braking Forum by BimmerWorld
Have some questions about suspension or brake setups for your E46 BMW? Get all your answers here!
Sponsored by BimmerWorld

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 10-13-2012, 03:55 PM   #1
keepbreakindown
Registered User
 
Join Date: Aug 2009
Location: Pittsburgh
Posts: 59
My Ride: 1999 323i
Rear Wheel Bearing and ebrake problem

Took my car in to get the rear wheel bearing replaced. The mechanic just called to say they can't do the wheel bearing because the ebrake "can't be removed, it's just stuck there" and he doesn't want to damage anything trying to get it off. Then the dreaded words...."you might have to take it to the dealer."

To be clear, the ebrake isn't stuck as in the wheels don't move. In fact it's too loose and doesn't hold the car on a hill. I'm too lazy to adjust the bolts under the handle. I'm pretty sure he's unable to physically remove it to get to the wheel bearing.

Has anyone ever experienced this? I haven't looked at it myself yet.

Thanks to anyone who might give me some insight.
keepbreakindown is offline   Reply With Quote
Old 10-13-2012, 04:31 PM   #2
Mcbridges11
Registered User
 
Join Date: Mar 2012
Location: Maine
Posts: 151
My Ride: 03 325i, 03 540i
Quote:
Originally Posted by keepbreakindown View Post
Took my car in to get the rear wheel bearing replaced. The mechanic just called to say they can't do the wheel bearing because the ebrake "can't be removed, it's just stuck there" and he doesn't want to damage anything trying to get it off. Then the dreaded words...."you might have to take it to the dealer."

To be clear, the ebrake isn't stuck as in the wheels don't move. In fact it's too loose and doesn't hold the car on a hill. I'm too lazy to adjust the bolts under the handle. I'm pretty sure he's unable to physically remove it to get to the wheel bearing.

Has anyone ever experienced this? I haven't looked at it myself yet.

Thanks to anyone who might give me some insight.
Very common- there is a hole in the rotor that is the e brake caliper adjustment- if you use a falt head you can turn the wheel/gear and tighten it as tight as it goes- this will allow you to take the rotor off and continue from there-dont try and force it the ebrake shoes are attached to the main dust cover and you can pull the fu**er right through...leading to more issues
Mcbridges11 is offline   Reply With Quote
Old 10-13-2012, 04:41 PM   #3
keepbreakindown
Registered User
 
Join Date: Aug 2009
Location: Pittsburgh
Posts: 59
My Ride: 1999 323i
THANKS!! Going to get my car back today so I'll give it shot. I'll run the car off a cliff before I take it back to the stealership.......ok, maybe not, but you get the point.
keepbreakindown is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 10-13-2012, 08:01 PM   #4
Mcbridges11
Registered User
 
Join Date: Mar 2012
Location: Maine
Posts: 151
My Ride: 03 325i, 03 540i
Quote:
Originally Posted by keepbreakindown View Post
THANKS!! Going to get my car back today so I'll give it shot. I'll run the car off a cliff before I take it back to the stealership.......ok, maybe not, but you get the point.
Haha right there with ya!- the hole is usually the top left- using a flashlight will help and itll take a few turns Im pretty sure that there are some videos on youtube- usually after you tighten that up youll be able to tap tap the rotor off- if youre not replacing the rotor tap in the hub area not on the actual disc!!!
Mcbridges11 is offline   Reply With Quote
Old 11-10-2012, 10:39 PM   #5
superd21007
Registered User
 
Join Date: Mar 2012
Location: New Haven MI
Posts: 61
My Ride: 99 323i
Just changed out my rear bearing with out taking the e brake apart... are you still dealing with this?
superd21007 is offline   Reply With Quote
Old 11-11-2012, 08:40 AM   #6
bigjae1976
Registered User
 
bigjae1976's Avatar
 
Join Date: Dec 2003
Location: Wichita
Posts: 11,520
My Ride: 2011 E90 M3
Send a message via MSN to bigjae1976
If you have to change the wheel bearing then I don't think ripping the ebrake shoes out of the dust shield is a big deal. All easy to get to once you get the hub off. Yeah, you'd have to buy new ebrake parts and a dust shield but its not THAT expensive.

Let me know if you need to rent a wheel bearing R&R tool...see my sig!
__________________
2013 F30 328i - Melbourne Red
2011 E90 M3 - Monte Carlo Blue
2004 E46 M3 - Imola red
bigjae1976 is online now   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Censor is ON



All times are GMT -5. The time now is 01:57 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
(c) 1999 - VerticalScope Inc. All rights reserved.