DSC brakes and ABS lights are one 325xi

cimca4120 · 10-24-2012, 08:31 AM

Hi all, I own an 325xi ´03 and i have a part replace on the front end of the car yesterday dont know the name in english (mulata o brazo), Havent take the car to alignmet but dont know it that what´s causing the problem.
have some one had the same Issue? can i get some help plzzzzzz

SamDoe1 · 10-24-2012, 09:17 AM

If Google translate is right, you replaced the front control arm. What you likely did is either damage or dislodge the wheel speed sensor on one or both of the front wheels. Check that out.

Have you driven the car yet?

cimca4120 · 10-24-2012, 09:27 AM

thnkx, yeah I took it from the mecanics shops home and from home to work and still on, will check on the sensors, and also I need to aligne the whells,
by the way do you knwo where are the sensors located?

SamDoe1 · 10-24-2012, 11:01 AM

http://realoem.com/bmw/showparts.do?...64&hg=31&fg=10

Part 10.

cimca4120 · 10-24-2012, 01:19 PM

Thanks a lot mate, looks similar like the brake sensor but its located in diferent place.!!!

10-24-2012, 08:31 AM	#1
cimca4120 Registered User Join Date: Oct 2012 Location: Guatemala Posts: 11 My Ride: E46 (325xi) View My Garage	DSC brakes and ABS lights are one 325xi Hi all, I own an 325xi ´03 and i have a part replace on the front end of the car yesterday dont know the name in english (mulata o brazo), Havent take the car to alignmet but dont know it that what´s causing the problem. have some one had the same Issue? can i get some help plzzzzzz

10-24-2012, 01:19 PM	#5
cimca4120 Registered User Join Date: Oct 2012 Location: Guatemala Posts: 11 My Ride: E46 (325xi) View My Garage	Thanks a lot mate, looks similar like the brake sensor but its located in diferent place.!!! Last edited by cimca4120; 10-24-2012 at 01:32 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-24-2012, 09:17 AM	#2
SamDoe1 Registered User Join Date: Oct 2010 Location: Minnesnowta Posts: 2,534 My Ride: 2004 330xi, 3 pedals View My Garage	If Google translate is right, you replaced the front control arm. What you likely did is either damage or dislodge the wheel speed sensor on one or both of the front wheels. Check that out. Have you driven the car yet?

10-24-2012, 09:27 AM	#3
cimca4120 Registered User Join Date: Oct 2012 Location: Guatemala Posts: 11 My Ride: E46 (325xi) View My Garage	thnkx, yeah I took it from the mecanics shops home and from home to work and still on, will check on the sensors, and also I need to aligne the whells, by the way do you knwo where are the sensors located?

10-24-2012, 11:01 AM	#4
SamDoe1 Registered User Join Date: Oct 2010 Location: Minnesnowta Posts: 2,534 My Ride: 2004 330xi, 3 pedals View My Garage	http://realoem.com/bmw/showparts.do?...64&hg=31&fg=10 Part 10.