Axles yo

Russian172 · 11-29-2012, 05:14 PM

So after thinking I had bad bearings I spun my wheels and wow
Question other than axles what needs replacing ?

Russian172 · 11-29-2012, 05:50 PM

Also my car is 325 but can 330 328 fit as well ?

Russian172 · 11-30-2012, 09:27 AM

Found a 330ci axle think it would fit guys. ?

Russian172 · 12-02-2012, 12:20 AM

Bought rebuilt ones instead of used
And got it out by taking the rear spindle bolts out (upper CA and LCA)

Hope fully my bearings will arrive tom morrow as planned

Also please leave any suggestions and advices as this is my first time working with bearings and axles

Russian172 · 12-02-2012, 05:10 PM

New axles with new bearings almost in

Had to pull down exhaust and the sway bar

Russian172 · 12-02-2012, 10:10 PM

Finally left side is done no noises or clunking what so ever

Hopefully I have time during this week to finish

11-29-2012, 05:14 PM	#1
Russian172 Registered User Join Date: Nov 2011 Location: Aurora, IL Posts: 1,130 My Ride: Flying brick View My Garage	Axles yo So after thinking I had bad bearings I spun my wheels and wow Question other than axles what needs replacing ? __________________ Need a bearing tool in Chicago-land ?http://forum.e46fanatics.com/showthread.php?t=964450 Find bmw wheel style here http://forum.e46fanatics.com/showthread.php?t=987999

11-29-2012, 05:50 PM	#2
Russian172 Registered User Join Date: Nov 2011 Location: Aurora, IL Posts: 1,130 My Ride: Flying brick View My Garage	Also my car is 325 but can 330 328 fit as well ? __________________ Need a bearing tool in Chicago-land ?http://forum.e46fanatics.com/showthread.php?t=964450 Find bmw wheel style here http://forum.e46fanatics.com/showthread.php?t=987999

11-30-2012, 09:27 AM	#3
Russian172 Registered User Join Date: Nov 2011 Location: Aurora, IL Posts: 1,130 My Ride: Flying brick View My Garage	Found a 330ci axle think it would fit guys. ? __________________ Need a bearing tool in Chicago-land ?http://forum.e46fanatics.com/showthread.php?t=964450 Find bmw wheel style here http://forum.e46fanatics.com/showthread.php?t=987999

12-02-2012, 12:20 AM	#4
Russian172 Registered User Join Date: Nov 2011 Location: Aurora, IL Posts: 1,130 My Ride: Flying brick View My Garage	Bought rebuilt ones instead of used And got it out by taking the rear spindle bolts out (upper CA and LCA) Hope fully my bearings will arrive tom morrow as planned Also please leave any suggestions and advices as this is my first time working with bearings and axles Attached Thumbnails __________________ Need a bearing tool in Chicago-land ?http://forum.e46fanatics.com/showthread.php?t=964450 Find bmw wheel style here http://forum.e46fanatics.com/showthread.php?t=987999

12-02-2012, 05:10 PM	#5
Russian172 Registered User Join Date: Nov 2011 Location: Aurora, IL Posts: 1,130 My Ride: Flying brick View My Garage	New axles with new bearings almost in Had to pull down exhaust and the sway bar Attached Thumbnails __________________ Need a bearing tool in Chicago-land ?http://forum.e46fanatics.com/showthread.php?t=964450 Find bmw wheel style here http://forum.e46fanatics.com/showthread.php?t=987999

12-02-2012, 10:10 PM	#6
Russian172 Registered User Join Date: Nov 2011 Location: Aurora, IL Posts: 1,130 My Ride: Flying brick View My Garage	Finally left side is done no noises or clunking what so ever Hopefully I have time during this week to finish __________________ Need a bearing tool in Chicago-land ?http://forum.e46fanatics.com/showthread.php?t=964450 Find bmw wheel style here http://forum.e46fanatics.com/showthread.php?t=987999

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread: