*sold*M5 E34 stage 2 flywheel 8.5# UUC

krautuner · 12-31-2012, 12:14 PM

Used part less than 3K was checked by UUC and sent back to me with new bolts.
Can handle up to 450hp & tipping the scales at only 8.5lbs this piece will improve the clamping force of your vehicle while keeping BMW reliability.

Designed to use the clutch disk, pressure plate and throw-out bearing from a 3.6 liter E34 M5.

Asking $300

BDUB328I · 12-31-2012, 03:41 PM

i read your thread and understand what this is ment to fit. but dont alot of people fit these on to e46 m3's? what is needed to make it work other than what you have?

krautuner · 12-31-2012, 08:05 PM

You'll need a E34 M5 spec clutch and throwout bearing and it should work in your M3, I'd research Turner, or Bimmerworld's websites to make sure.

krautuner · 01-01-2013, 10:30 AM

fifteen dollars to ship in the States, all PMs replied

krautuner · 01-02-2013, 08:49 AM

bump

krautuner · 01-03-2013, 04:38 PM

bump

krautuner · 01-05-2013, 03:45 PM

all PM's replied

krautuner · 01-08-2013, 12:18 PM

Bump, PM's replied

bparka12 · 01-08-2013, 06:56 PM

just a couple quick questions... what is the uuc sku# on the flywheel? is it the B1? what year model of car and transmission (5 or 6 speed) did this come off of?

krautuner · 01-08-2013, 09:20 PM

it was on a 2001 325i 5spd. and it's a B1

krautuner · 01-08-2013, 11:14 PM

it has been sold

12-31-2012, 12:14 PM	#1
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	soldM5 E34 stage 2 flywheel 8.5# UUC Used part less than 3K was checked by UUC and sent back to me with new bolts. Can handle up to 450hp & tipping the scales at only 8.5lbs this piece will improve the clamping force of your vehicle while keeping BMW reliability. Designed to use the clutch disk, pressure plate and throw-out bearing from a 3.6 liter E34 M5. Asking $300 Last edited by krautuner; 01-08-2013 at 11:13 PM.

12-31-2012, 03:41 PM	#2
BDUB328I Registered User Join Date: Nov 2006 Location: Lancaster, PA Posts: 824 My Ride: bmw 328i sedan (E46) View My Garage	i read your thread and understand what this is ment to fit. but dont alot of people fit these on to e46 m3's? what is needed to make it work other than what you have? __________________ CHECK OUT MY M3 SEDAN SWAP!! http://forum.e46fanatics.com/showthr...978&highlight= AND MY 328I PARTS FOR SALE http://forum.e46fanatics.com/showthr...057&highlight= SPONSORS: \|Good 'N Plenty Restaurant, 150 Eastbrook Road Smoketown, PA\| \|http://www.thebmwpartstore.com/ \| \| http://www.advancedclutch.com/ \|

01-08-2013, 06:56 PM	#9
bparka12 Registered User Join Date: Sep 2011 Location: Alpine Utah Posts: 46 My Ride: 330ci View My Garage	just a couple quick questions... what is the uuc sku# on the flywheel? is it the B1? what year model of car and transmission (5 or 6 speed) did this come off of? __________________ VMR VB3 - ZHP FCA - UUC ROTORS/P1 FW/SWAYBARBARIAN/SSK EVO3 W/DSSR - DINAN CARBON FIBER CAI - SHARKED Last edited by bparka12; 01-08-2013 at 07:14 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

12-31-2012, 08:05 PM	#3
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	You'll need a E34 M5 spec clutch and throwout bearing and it should work in your M3, I'd research Turner, or Bimmerworld's websites to make sure.

01-01-2013, 10:30 AM	#4
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	fifteen dollars to ship in the States, all PMs replied

01-02-2013, 08:49 AM	#5
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	bump

01-03-2013, 04:38 PM	#6
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	bump

01-05-2013, 03:45 PM	#7
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	all PM's replied

01-08-2013, 12:18 PM	#8
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	Bump, PM's replied

01-08-2013, 09:20 PM	#10
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	it was on a 2001 325i 5spd. and it's a B1

01-08-2013, 11:14 PM	#11
krautuner Registered User Join Date: Oct 2009 Location: New Berlin. WI Posts: 33 My Ride: 2001 325IT(sold) View My Garage	it has been sold