Angel eyes that can turn off?

Who sells LED angel eyes for the e46 that can be turned off? I found some on ebay that claimed to be able to but I'd rather buy from Umnitza or another sponsor. PS sorry if this has been asked but when I did search I didn't find anything.

Brendan

Turned off in what regards? Through a switch so you have control?

Originally Posted by Solidjake

Turned off in what regards? Through a switch so you have control?

Thats what I was thinking like through a remote or something but what he was saying seems like it will work^. Thanks

Use a DDM Tuning relay harness and take out the fuse; they will turn off.

Alternatively, if you want to switch the angel eyes on and off from inside the car, add a switch in series with the trigger wire that turns the angels eyes on when your car is on. A switch will be like $2 from radioshack. This is also using a DDM Tuning relay harness.

I've wired in a switch so I can turn mine off whenever I like from my drivers seat.

Originally Posted by Dean320ci

I've wired in a switch so I can turn mine off whenever I like from my drivers seat.

+1

Took like 15 mins & $8.

Originally Posted by Dean320ci

I've wired in a switch so I can turn mine off whenever I like from my drivers seat.

same here, I got a switch with orange LED indicator and mounted it under my E-brake, the black matched very close to the interior, the LED is a little more orange than the factory interior lights.

it involved a little work, and I don't remember if I have any photos from it anymore. basically you buy some 20-22 gauge wire and extend the signal wire for the relay to a switch inside the car, and back out to the relay. My switch needed a ground for the LED so I used one of the E-brake mounting bolts and an eyelet on the ground wire.

I ran it in through the rubber boot in the passenger footwell area, just used a sharp pick to poke a small hole in an unused nipple of it. then under the dash to the center console coming through the radio/shifter area.

EDIT:
heres my switch.
http://www.wiringproducts.com/conten..._switches.html

Originally Posted by Dean320ci

I've wired in a switch so I can turn mine off whenever I like from my drivers seat.

Did you do the same thing as rossisboss^?

Originally Posted by vorceb325i

Did you do the same thing as rossisboss^?

Yep basically.
Wire up exactly as per normal. I.e. wire up the trigger wires to the ignition wire in the ecu, and to the footwell light.
then just wire in a switch inbetween the trigger wires.
Really quite simple.

Originally Posted by Dean320ci

I've wired in a switch so I can turn mine off whenever I like from my drivers seat.

Same here.

You should just wire in a switch. Should be pretty easy with some electrical know how

Look at this

http://www.bimmerfest.com/forums/sho...349&highlight=

I just wired my lights to my fogs. I diddnt use my fogs often in the past just to look good so now they go on with the halos!

I made my own XD just buy a switch from RadioShack, put it where you want in the car and run a wire from the red with yellow dot wire to the switch and run the other one out to the angel eyes.

DONE!

If I had pictures I'd show you but I have none at the moment.

Originally Posted by jerseyzillest

I made my own XD just buy a switch from RadioShack, put it where you want in the car and run a wire from the red with yellow dot wire to the switch and run the other one out to the angel eyes.

DONE!

If I had pictures I'd show you but I have none at the moment.

What kind of wire and where can I get it from?

All you need is a switch, 6' of 16g copper multi-stranded wire, a coat hanger, some electrical tape, 2 female space connectors, and a 1/2" drill or dremel.
Total work - 20 minutes
Total cost - $5 including switch.

Run an extension to the primary trigger into the switch, run the wire from the switch back out to the ECU, mount the switch through the hole, done.